Basic Info.
Specification
500*400*280
Product Description
Technical Specifications | Measurement Principle (Porosity) | Boyle's law, PV measurement by direct Helium Injection |
| Fluid Type | Gas (Helium) |
| Porosity Range | 0 - 50 % |
| Core Size | Diameter: 1.5", Length: 4" max. |
| Measurement pressure | 0 - 200 psig |
Accessories | Pressure transmitter Make: Wika Accuracy : 0.05 % FS |
| Temperature Compensated |
| Process Indicators |
| Make : Novus / Wika |
| Linear voltage and current: 0.15% of maximum span. |
| Gas Regulator for Helium |
| Make: Fairchild (USA). / Swagelok (USA) |
| Gas System (Recommended) |
| Ball Valves and Fittings : Brass, Swagelok |
| Tubing : Copper |
| Measurement principle (Permeability) | Darcy's law (permeability measured using air) |
| Fluid Type | Air |
| Core holder type and | Hydrostatic Core holder body Wetted Material SS-304 |
| Material of Construction |
| Core Size | Diameter: 1-1.5", Length: 4" max. |
| Confining pressure | 2500 psig, quick loading, uniaxial |
| Overburden pressure system and control | Hand Pump, for use with oil. (Wetted Materials SS-304) |
Components | Overburden system |
| Needle Valves and Fittings : SS, TNB Make |
| Tubing : SS |
| Permeameter Flow System |
| Ball Valves and Fittings : Brass/SS, TNB Make Tubing : Copper |
| Low pressure differential pressure transmitter, 0 - 5 psig |
| Make : Siemens or equivalent Accuracy : 1 % FS |
| Low pressure upstream pressure transmitter, 0 - 5 psig |
| Make : Wika or equivalent Accuracy : 1 % FS |
| High pressure upstream pressure transmitter 0 - 60 psig |
| Make : Wika or equivalent Accuracy : 1 % FS |
| Flow meter 0 - 10 cc/min and 0 - 600 cc/min, multi gas |
| Make : Aalborg (USA) / Sierra (USA) Accuracy : 1 % FS |
| Gas Regulators for Low (0 - 5 psig) and high (0-100 psig) pressure |
| Make : Fairchild (USA) |
| Process Indicators |
| Make : Novus |
| Linear voltage and current: 0.15% of maximum span. |
| Vacuum Pump |
| Vacuum pump for sleeve expansion. |
| Electrical requirements | 110 - 220 V AC, 50 - 60 Hz |
| Computer | PC with Data Acquisition Software
(Along with software controlled data measurement, collection, calculation and report generation) |
Instrumental setup break-up:- Core holder with size to accommodate the specified core length and diameter
- Necessary gas regulators
- Necessary Viton sleeves
- And other accessories required for the set up
- Confining pressure system.
- Vacuum Pump suitable for the set-up
- Differential Pressure Transducer ( pressure of both ends of core holder should be measured )
- Low pressure differential pres
sure transmitter, 0 - 5 psig, Accuracy : ± 1 % FS or better- Low pressure upstream pressure transmitter, 0 - 5 psig, Accuracy : ± 1 % FS or better
- High pressure upstream pressure transmitter 0 - 60 psig, Accuracy : ± 1 % FS or better
- Flow meter: 0-10 and 0-600 cc/min, Accuracy : ± 1 % FS or better
- Temperature Sensor
- 1 Personal computer with pre-installed software: Core i-5 or better, RAM 8 GB or higher, 500 GB hard disk or higher.
Note:
All core holder, fittings, valves, tubing, pressure transducers are SS-316 Stainless Steel or better. |
Address:
No. 265 Langyatai Road, Huangdao Zone, Qingdao, Shandong, China
Business Type:
Manufacturer/Factory
Business Range:
Instruments & Meters, Manufacturing & Processing Machinery
Management System Certification:
ISO 9001
Company Introduction:
Huangdao Senweida Co., Ltd manufacuture roller oven, HTHP filter press, HTHP consistometer, Atmospheric Consistometer, Single Cell Pressurized Consistometer, Dual Cell Pressurized Consistometer, Pressurized Curing Chamber, HTHP Curing Chamber, Dual Pressurized Curing Chamber, Low Temperature Portable Curing Chamber, constant speed mixer,
){kind=link}